Products

Secorp New Generation Metals

  • 1
  • 2

  • Titanium Alloys
  • High Temperatures Alloys
  • Corrosion Resistant Alloys
  • Aluminum Alloys
  • Formula Welding Alloys
  • Drilling Tools
  • Ground Engineering

Titanium and titanium alloys are classified as body-compatible, corrosion resistant, allergy neutral, non carcinogenic, non-toxic and taste-neutral. Its low weight, high strength and high elasticity make titanium as the preferred material for medical implants for the human body.


Product Code UNS No Major Application
SE-10 R50250 Heat exchangers and condenser tubing. Sea-water, marine equipment and desalinization. Pickling basket. Electrolytic production of copper, manganese, nickel and other metals. Pulp and paper production.
SE-20 R50400 Heat exchangers and condenser tubing. Sea-water, marine equipment and desalinization. Pickling basket. Electrolytic production of copper, manganese, nickel and other metals. Pulp and paper production.
SE-30 R50500 Heat exchangers and condenser tubing. Sea-water, marine equipment and desalinization. Pickling basket. Electrolytic production of copper, manganese, nickel and other metals. Pulp and paper production.
SE-40 R50700 Heat exchangers and condenser tubing. Sea-water, marine equipment and desalinization. Pickling basket. Electrolytic production of copper, manganese, nickel and other metals. Pulp and paper production.
SE-50 R56400 Downhole exploration logging equipment. High performance automobile valves. Springs and hubs. Human implants.
SE-70 R52400 Corrosive wastes disposal wells, heat exchangers and condenser tubing. Sea-water, marine equipment and desalinization. Pickling basket. Electrolytic production of copper, manganese, nickel and other metals. Pulp and paper production.
SE-110 GR 11 Corrosive wastes disposal wells, heat exchangers and condenser tubing. Sea-water, marine equipment and desalinization. Pickling basket. Electrolytic production of copper, manganese, nickel and other metals. Pulp and paper production.

High temperature resistance is essential in many applications; gas turbines, fuel nozzles, heat treating fixtures, and furnace muffles. These materials must stand up to the corrosive attack of hot gases and products of combustion.


Product Code UNS No Major Application
SE-HN N10003 Use widely in chemical industries. Exceptional resistant to molten halogen salts.
SE-HS N10003 Turbine engine components. Chemical process environments.
SE-HW N10004 Major use in aircraft engine components and equipment handling hydrochloric, sulfuric, acetic and phosphoric acids.
SE-HX N06002 Furnace rolls made of this alloy were still in excellent condition after 8700 hours operation at 2150°F (1177°C). Turbine Engines, heat treatment components. Radiant heating tubes. Petrochemical applications.
SE-Waspalloy N07001 Turbine blades compressor discs, fasteners, shafts of turbine engines.
SE-R41 N07041 Formulated to use in mainly Aerospace industry for turbine wheels and blades, after burner parts, combustion chamber liners and missile components.
SE-80A N07080 Exhaust valves and diesel engine combustion chambers. Rotors, bolts and other parts of turbine engines.
SE-N155 R30155 Tail cones, after burner parts, exhaust manifolds, turbine blades, buckets, nozzles and combustion chambers of jet engines.
SE-188 R30188 Being one of the most corrosion resistant alloy, it is widely used in chemical and nuclear applications. Extensive applications for airframes, jet engines liners combustor-cams.
SE-601 N06601 Heat-treatment and Furnace components. Ash-handling and tube supports components of power fields.
SE-L605 R30605 Extensively used in jet engine parts. Also widely used in various industrial furnace applications.
SE-617 N06617 Furnace components. Radiant tubes. Jet engine parts.
SE-625 N06625 Chemical and pollution control equipment piping, valves, marine equipment. Pump Shafts for high horsepower pumps and valves lining for high pressure H²S service.

Corrosion Resistant Alloy (CRA) are Nickel-based or cobalt-based alloys that are used for parts and components that must withstand harsh environments. CRA exhibit high heat, corrosion and acid resistance, coupled with wearability. They are ideal materials for use for pumps, valves, piping systems, process equipment, turbines and assemblies in the marine, chemical processing, oil and gas, aerospace and military industries marine, chemical processing, oil and gas, aerospace and military industries.


Product Code UNS No Major Application
SE-B2 NO10665 Process equipment for the manufacture of hydrochloric sulfuric, acetic and phosphoric acids.
SE-C4 NO6455 High temperature stability in the range of 650-1440°C. Ideally suited for hot chloride, acids and alkaline solutions. Widely used in chemical process industry.
SE-C22 NO6022 Equipment or parts exposed to hot sulphuric and phosphoric acids, complex chemical mixtures and acetic acid.
SE-C276 NO10276 Downhole tubulars for extremely corrosive wells; process equipment for sulfuric acid plants, copper smelters and flue gas desulfurization.
SE-G NO6007 Downhole tubulars for deep corrosive wells. Flue gas desulfurization. Evaporators, heat exchangers. Pulp mill bleaching equipment.
SE-G3 NO6985 Downhole tubulars for deep corrosive wells. Flue gas desulfurization. Evaporators, heat exchangers. Pulp mill bleaching equipment.
SE-23 NO8020 Chemical process pumps, valve stems and piping, pickling equipment. Pulp mill bleaching equipment.
SE-28 NO8028 Downhole tubulars for extremely corrosive wells. Evaporator tubes in producing of phosphoric acid. Tubing and heat exchanger in sulfuric acid production. Sea-water piping and condensers. Sodium hydroxide evaporators.
SE-P31 NO7031 Diesel exhaust valves. Hardware for deep corrosive gas and oil wells.
SE-200/201 NO2200/2210 Equipment for caustic manufacturing and storage, synthetic fibre production. Electronic components. Magnetoresistive devices. Food Processing and chemical equipment.
SE-A286 K66286 Fasteners, extrusion press liners.
SE-400 NO4400 Marine fixtures, shafting, valves, pumps, fasteners. Salt evaporators, piping. HF reboilers; chlorinated solvent. Acid pickling hardware.
SE-K500 NO5500 Pump shafts, impellers, valve components. Springs, fasteners. Oil well packers, subsurface safety valves.
SE-K502 NO5502 Pump shafts, impellers, valve components. Springs, fasteners. Oil well packers, subsurface safety valves.
SE-600 NO6600 Manufacture of photographic materials containing silver salts. Ethylene dichloride crackers. Process carrier industry-furnace trays, mufflers, hangers, etc. Nuclear steam generator tubing. Pulp & paper mill liquor heater tubing.
SE-718 N07718 High strength nickel-chromium-iron alloy which can precipitation-hardened due to its columbium content and additions of aluminium and titanium. Provides excellent corrosion resistance and mechanical properties at high, low and even at cryogenic temperatures.
SE-X750 NO7750 Springs. Extrusion dies. Forming tools. Fasteners.
SE-800/800H NO8800/8810 Tubes for steam methane reformers and ethylene pyrolusis units. Furnace tube for diphenyl, vinyl chloride monimer and acetis anhydride. Appliance heater tubing, heat treat fixtures.
SE-825 NO8825 Downhole tubulars for deep corrosive wells. pollution control, radwaste systems. Pickling tank heaters, hooks ect. Chemical handling equipment-valves, pumps and piping.
SE-904L/904MO NO8904/8925 Offshore pipe-lines and platforms. Pulp and paper industry. Areas where 300 series stainless steels fail in chloride stress corrosion.
SE-7030 C71500 Petrochemicals, Heat exchangers, Marine and Shipbuilding Industries.
SE-9010 C70600 Offshore pipelines and platforms, sea-water desalination plant, refineries, heat-exchangers and power station condensers.
SE-17/4PH C70600 Use where good ductility at subzero temperatures for some applications. Mainly specified for high temperature & abrasion resistance.

Aluminium alloys are alloys in which aluminium (Al) is the predominant metal. The typical alloying elements are copper, magnesium, manganese, silicon and zinc


Product Code UNS No Major Application
SE-5083 A95083 Commonly used in the manufacture of unfired, welded pressure vessels, marine, auto aircraft cryogenics, drilling rigs, TV towers, transportation equipment, and in missile components.
SE-5086 A95086 Commonly used in the manufacture of unfired, welded pressure vessels, marine, auto aircraft cryogenics, drilling rigs, tanks, TV towers, transportation equipment, and in missile components.
SE-6061 A96061 Commonly used in the manufacture of heavy-duty structures requiring good corrosion resistance, truck and marine components, railroad cars, furniture, tank fittings, general structural and high pressure applications, wire products, and in pipelines.
SE-6063 A96063 Generally considered to be an extrusion alloy that is heat treatable for strengthening.

Formula Welding alloys are metallurgically engineered for maintenance and repair welding. Depending on the types of applications, all core wires and coating are balanced with super alloying elements such as chromium, columbium, nickel, molybdenum, manganese, tungsten etc. Deoxidising agents are incorporated to tie up oxygen which otherwise will affect the ductility and soundness of the alloy deposited.


Item Size (MM) / Packing (KG) Application Use
Low-Alloy Steel
TWE-711 1.2 / 15 For general purpose welding of carbon & some bow alloyed steels up to 70,000 psi. Ease in all-position welding.
X1 3.2 / 20
4.0 / 30
4.8 / 30
Low hydrogen for joining low to medium carbon & low alloy steel with tensile strength of 79,000 eg. CASING/CAGE. Deposited metal gives excellent mechanical properties, crack resistance and X-ray quality. Weldability is good with high welding efficiency.
X2 3.2 / 20
4.0 / 15
4.8 / 30
For joining of low Alloy High tensile & carbon steels. Particularly suited for Kelly-Bar.
X7 3.2 / 13.5
4.0 / 12
X7 is best for joining & build-up (Buffer) of low & high alloy steels. Highly suited for Mn steels.
X8 2.5 / 27
3.2 / 12
4.0 / 13.5
4.8 / 27
For very high tensile strength joining of low & high alloy steels eg. joining Round Shrunk chisel holder to rock auger.
X9 2.5 / 10.5
3.2 / 15
4.0 / 15
4.8 / 13.5
X9 is best for joining & underlaying of medium to high carbon steels, high alloy steels & unknown analysis steel or problem steels. Highest tensile strength.
Hard Facing
Formula 88 2.5/ 30
3.2 / 12
4.0 / 13.5
For gauging, chamfering & cutting of metal.
HS99 3.2 / 30
4.0 / 30
4.8 / 30
HS99 is the ultimate for rebuilding of rock chisel tooth.
SA369 3.2 / 30
4.0 / 30
One grade superior to SA 357.
SA457 3.2 / 30
4.0 / 30
4.8 / 30
SA457 is best for intermetallic abrasion & frictional wear eg.crane between 35 to 75 tons & idlers & sprockets of crane below 35 tons, kelly guide & lock
SA468 3.2 / 30
4.0 / 12
4.8 / 30
For intermetallic abrasion & frictional wear eg. crane above 75 tons. Also highly suited for build-up for chisel tooth.
SA577 3.2 / 30
4.0 / 30
4.8 / 30
For buffers & build-up prior to depositing HS99 on Rock Chisel. And necessary for idlers & sprockets of crawler cranes above 75 tons.
SA579 3.2 / 30
4.0 / 30
4.8 / 30
For surface protection against severe abrasion eg. Boring bucket, augers & dredge equipment. Hardness : 59 to 61 RC.
SA707 2.5 / 30
3.2 / 30
4.0 / 30
SA707 is best for surface protection against very severe high stress abrasion. Hardness : 61 - 63 RC. Superior in performance to SA579.
SA808 3.2 / 30
4.0 / 30
Complex carbide for better simple layer performance in extreme abrasion resistance.
SA808G 3.2 / 30
4.0 / 30
Oxygen/acetylene tungsten carbide for coring & cutting equipment.
44FC 3.2 / 30 For build-up prior to depositing SA808G.
Cast Iron
AP20 2.5 / 13.5
3.2 / 13.5
4.0 / 13.5
For joining and build up of cast iron components. Highly suitable for cast iron to steel joining.
AP2061 2.5 / 10.5
3.2 / 13.5
4.0 / 13.5
99% Nickel for joining of most cast iron.

 

Secorp Metals is one of the World's leading suppliers of Foundation Drilling Tools and Accessories, with manufacturing facilities based in America serving the Asian Market.


Item Major Application
New TCI Sealed Journal Bearing Tricones We offer complete line from all the major leading manufactures such as Reed, Hughes Christensen, Smith, Security DBS, Varel International, JZ, TSK, DBI, Atlas Copco.
Re-run & Reconditioned Tricones Each bit is hand selected and inspected by our highly trained technicians, then put through a step by step rebuilding process. At Secorp Metals, first and second run quality and rebuilt/reconditioned bits are sold daily. With hundreds of drill bits in the inventory, we can supply the quantity and quality you need.

 

Item Dimension
Round Shank Chisel SRDC 40175 H
SRDC 40195 H
SRDC 40220 H
SRDC 40220 HF
SRDC 40220 6TCI
Round Shank Holder SE 43H
SE 85H
Astollen SE 26.5/5 x 9mm
SE 37/7 x 11mm
Excavator Teeth and Holder 25T
18TL
35S
Flat Teeth SEFZ72 Tooth and Holder
SEFZ80 Tooth, Holder, Lock and Pin